Dinette Millwork Drawings

Any topic related to our Camano boats

Dinette Millwork Drawings

Postby Rob&Bill » Sun Jun 27, 2021 8:22 am

Hello, have recently purchased hull number 32, with custom millwork in the area of dinette/table (main cabin). The millwork looks factory done, but i want to refit to the standard dinette and table configuration. Does any one have or know where i could find the millwork drawings for the dinette configuration? Thanks, Bill, Ladysmith, BC
Rob&Bill
 
Posts: 5
Joined: Sun May 23, 2021 2:13 pm

Re: Dinette Millwork Drawings

Postby HugSue » Mon Jul 26, 2021 3:48 pm

Hi Bill
We recently replaced our dinette with a mahogany version. The original dinette is in our garage. You are welcome to borrow it. We are in Sidney. Cheers, Roger and Susan (Willow)
HugSue
 
Posts: 5
Joined: Sat Mar 13, 2021 9:08 am

Re: Dinette Millwork Drawings

Postby Rob&Bill » Mon Jul 26, 2021 4:26 pm

Hello Roger and Susan ... thanks so much for reply and offer. We have scheduled work at Vector's yard starting 31st of Aug and will be staying in area for a few days and would like to follow up if that works for you? Our email address is busybeaver@telus.net ..... please contact by email to coordinate meeting. Regards, Bill
Rob&Bill
 
Posts: 5
Joined: Sun May 23, 2021 2:13 pm

Re: Dinette Millwork Drawings

Postby Rob&Bill » Sat Sep 04, 2021 12:59 pm

HugSue wrote:
> Hi Bill
> We recently replaced our dinette with a mahogany version. The original
> dinette is in our garage. You are welcome to borrow it. We are in Sidney.
> Cheers, Roger and Susan (Willow)
Rob&Bill
 
Posts: 5
Joined: Sun May 23, 2021 2:13 pm

Re: Dinette Millwork Drawings

Postby Rob&Bill » Sat Sep 04, 2021 1:04 pm

Hi Roger & Susan, apologies for tardy reply. Was at Vector for some work last week but lost your contact info so couldn't call. When you say "dinette" does that include seating arrangement? If yes we would still like to see.
Regards,
Bill
Rob&Bill
 
Posts: 5
Joined: Sun May 23, 2021 2:13 pm

Re: Dinette Millwork Drawings

Postby HugSue » Sat Sep 04, 2021 2:25 pm

Hi Bill
Please call Roger at +1 (250) 891-8887 and he can explain what we have.

Cheers
Susan
HugSue
 
Posts: 5
Joined: Sat Mar 13, 2021 9:08 am


Return to Open Topics

Who is online

Users browsing this forum: No registered users and 2 guests

cron